Eine handverlesene Sammlung von YouTube-Videos zu CFMOTO-Wartung, Fahrwerksabstimmung, Umbauten und Fahrberichten.
This video demonstrates a no-cost exhaust modification on the CFMOTO 675SR. It walks through accessing and altering the exhaust to change its character without buying aftermarket parts. The procedure is shown step by step on the stock system.
This video shows a power kit being installed on the CFMOTO 800MT. It documents the fitting work in progress on the motorcycle. The focus is the installation steps rather than a review.
This video covers an ECU flash performed on the CFMOTO 450SR (450SS) to address the factory throttle behaviour. An ECU flash reprograms the motorcycle's Electronic Control Unit to optimize power delivery. The stated goal is to fix jerky throttle response in the lower gears and uneven power at higher speeds. The rider reports smoother, more linear power delivery after the tune.
This video shows the first engine oil change carried out on a CFMOTO 675SR. It covers the initial oil-change service step for this model. A short, practical look at the bike's engine oil maintenance.
This video shows the second engine oil change being performed on a CFMOTO 450SR. It covers the routine oil-change maintenance step for this model. A short, practical look at servicing the bike's engine oil.
This short video shows routine servicing being carried out on the CFMOTO 675SR-R. It offers a quick look at the maintenance work on this model.
Installation of a crash guard on a CFMOTO 450MT. The clip shows the bike with the engine protection fitted. Protection intended to shield the engine and frame in a fall.
Adding a crash bar and a rear top box to a CFMOTO 450MT. The clip shows fitting protection and luggage accessories aimed at travel and adventure use. Demonstration of the install on the bike.
Installation of protective frame sliders on a CFMOTO 675NK. The clip shows mounting the crash protection intended to limit damage in a fall. Hands-on walkthrough of the fitting process.
This video shows the engine oil and oil filter change on the CFMOTO 650NK. It uses a Hiflofiltro oil filter together with Shell Advance motorcycle oil. The clip covers draining the used oil, fitting the new filter and refilling the engine.
This video demonstrates how to change the engine oil and oil filter on a CFMOTO bike, with an emphasis on a clean, no-spill method. It covers draining the old oil, replacing the filter and refilling with fresh oil. The tools and consumables used (oil, filter, crush washer, O-ring) are pointed out along the way.
This video demonstrates the first oil change on the CFMOTO 450SR (450SS) as a do-it-yourself procedure. It covers the tools and materials needed, draining the old oil, replacing the oil filter, and refilling with fresh engine oil.
This video shows fitting a DNA air filter and an IXIL catalyst suppressor to the CFMOTO 450MT, then a custom ECU remap to match the fuel map to the new parts. It includes removing the ECU, flashing the custom map, and refitting it.
This video walks through the first oil change on the CFMOTO 300NK and how to reset the service reminder afterwards. It covers draining the oil, replacing it, and clearing the maintenance indicator.
This video covers an ECU remap performed on the CFMOTO 450MT to address its jerky throttle response. It explains what an ECU remap is and the reasons for doing it. The results are reviewed in terms of throttle response, sweet-spot RPM, highway performance and fuel economy. It also notes that some issues remain after the remap.
This short video shows the engine oil change on the CFMOTO 300NK. It walks through the basic steps of draining and refilling the engine oil on this model.
This video shows how to remove the tail fairings on the CFMOTO 675SR-R, then fit aftermarket R1-style fairings in their place. It walks through the disassembly and the replacement panel installation.
This video covers an ECU tune on the CFMOTO 450MT (Ibex) aimed at fixing the snatchy throttle and abrupt fueling. It shows the bike before and after the tune to assess how the throttle response changes. The tune was carried out on a dyno by a third-party specialist.
This video demonstrates the first service oil change on the CFMOTO 300NK (also applicable to the 300SS). It walks through draining and refilling the engine oil step by step. This is part 1 of a two-part series; part 2 covers chain cleaning, lubrication and adjustment, plus the fasteners to retorque.
Demonstration of installing a heat shield on the CFMOTO 800MT. The clip shows fitting an anti-heat cover protecting the rear shock. The shield isolates the monoshock from the exhaust's heat. Content focused on installing a protective accessory.
Demonstration of fitting an adjustable steering damper on the CFMOTO 800MT. The clip shows the custom accessory being installed. The steering damper is intended to stabilize the front end. Content focused on installing a handling accessory.
Demonstration of fitting a lowering kit on the CFMOTO 800MT. The clip shows the accessory being installed in a workshop. The goal is to reduce the bike's seat height. Content focused on accessory installation.
Demonstration of an ECU remap on the CFMOTO 675SR. The clip shows flashing the ECU and dialing in the fuel mapping. The calibration is paired with a full exhaust system. Content focused on improving performance and engine response.
Demonstration of disassembling the CFMOTO 800MT (Ibex 800). The clip shows the removal of fairing parts. Useful for reaching components located under the panels. Practical content for maintenance tasks that require teardown.
Demonstration of combined servicing on the CFMOTO 450SR. The clip shows the engine oil change. It also covers replacing the coolant. Practical content for routine fluid maintenance on the bike.
Tutorial showing the engine oil replacement on the CFMOTO 450SR. The clip walks through the oil change step by step. Draining the used oil, then refilling with fresh oil. Practical content aimed at the bike's periodic maintenance.
Demonstration of a quick engine oil change on the CFMOTO 450SR (2023 model, sharing its platform with the 450SS). The clip shows the maintenance procedure carried out at home. Draining the used oil, then refilling with fresh oil. A short, practical format aimed at routine servicing of the parallel-twin.
This tutorial explains how to address jerky throttle response on the CFMOTO 800MT (Ibex 800T international version) by adjusting the throttle mapping. The procedure requires no tools and is presented as a fix for the uneven throttle feel some riders experience.
This video covers the break-in service of the CFMOTO 700CL-X, including the engine oil change, oil filter replacement, and chain adjustment. It is intended as a guide for new owners of the bike.
This video shows the installation of several accessories on the CFMOTO 700CL-X: a new seat, a chain guard, and a radiator guard. It also points out where compatible accessories for the bike can be sourced.
This tutorial demonstrates how to remove the fairings on the CFMOTO 675SR-R. The same procedure applies to the opposite side of the bike.
This video documents the first service of a CFMOTO 650MT after the 300 km break-in period. It includes an oil and filter change, chain adjustment, and a general check of the brakes, pads, electrical system and mechanical components.
This tutorial shows how to change the engine oil on the CFMOTO 450SR (also sold as the 450SS), covering the procedure step by step.
This tutorial covers installing a dual horn on the CFMOTO 450SR. It walks through the wiring diagram, removal of the panels and fairings to gain access, and the horn and wiring setup.
This tutorial shows how to change the engine oil on the CFMOTO 450MT (Ibex 450), walking through the full procedure step by step.
This video covers fitting a 15-tooth front sprocket on the CFMOTO 450MT (Ibex 450) to reduce engine RPM at highway speeds. In stock form the engine revs high (around 7,000 rpm at 110 km/h), and the change is aimed at smoother, quieter cruising. A before-and-after comparison is shown.
This tutorial demonstrates how to access and remove the ECU on the CFMOTO 450MT (Ibex 450). It covers the steps needed to reach and detach the control unit.
This short clip shows an airbox modification on the CFMOTO 300NK, a common change aimed at improving intake airflow. The video focuses on the modified airbox itself.
This short tutorial demonstrates how to change the engine oil on the CFMOTO 700CL-X Sport as a do-it-yourself maintenance task.
This service tutorial shows how to change the oil and filter on the CFMOTO 700CL-X and how to adjust the drive chain tension. Demonstrated on the CL-X Classic during its break-in service; the procedure is common to the 700CL-X range.
This video covers the first oil change on the CFMOTO 675SR (675SS), performed at the end of the break-in period.
This how-to tutorial covers the first oil change on the 2026 CFMOTO 675NK, performed after the break-in period. It walks through the oil and filter replacement and lists the tools, oil capacity, and torque values used.
This DIY maintenance tutorial covers servicing the CFMOTO 650MT: changing the engine oil and oil filter, and flushing the radiator coolant.
This video covers having an ECU flash tune applied to the CFMOTO 450SR (450SS). It walks through the process and the resulting change in throttle response and power delivery.
This video documents the disassembly of the CFMOTO 450SR, walking through the teardown of the bodywork and components. First part of a multi-part teardown.
This short tutorial shows how to remove the side panel on the CFMOTO 450MT (Ibex 450). A useful first step before accessing components located behind the bodywork.
This tutorial covers the 1,000 km run-in service on a CFMOTO 800MT. It includes the engine oil and filter change, cleaning the oil strainer, chain adjustment and lubrication, and general inspection checks. A 10W/50 oil is used.
This step-by-step tutorial shows how to remove the fairings and fuel tank on the 2023-2024 CFMOTO 700MT for routine maintenance. Reassembly follows the same steps in reverse order.
This video documents dyno runs on a CFMOTO 450SR fitted with an aftermarket ECU tune. It shows the horsepower gains measured on the dyno and discusses improved throttle response, smoother power delivery and better acceleration after the remap.
This short tutorial shows an engine oil change on the CFMOTO 675SR. The procedure is shared with the 675NK, which uses the same platform.
This tutorial walks through the 3,000-mile service on a CFMOTO 650 Adventure. It covers changing the engine oil and filter, cleaning and lubricating the chain, and checking the air filter. The procedure uses basic hand tools and the CFMOTO oil kit that also fits the 650NK.
This tutorial demonstrates how to remove the side covers and fairing panels on the CFMOTO 650GT. It shows the steps to detach the cover set carefully, providing access to components underneath for maintenance work.
This tutorial covers the installation of adjustable CNC aluminium rearsets on the CFMOTO 450SR, replacing the OEM footpegs and brake/clutch assemblies. It walks through removing the original rearsets and fitting the new adjustable set for a more comfortable riding position. The video notes that this is also a convenient moment to switch to GP shift if desired.
This tutorial demonstrates how to change the engine oil on the CFMOTO 800NK, covering the main steps of the procedure.
This video shows the CFMOTO 800MT-X having its stock handguards replaced with Barkbusters hand guards and a 65L steel top case added. The accessories are installed and the fitted result is presented.
This tutorial demonstrates how to change the engine oil and oil filter on the CFMOTO 800MT. It notes that performing the work yourself may affect the vehicle warranty and that the dealer should be consulted.
In this official CFMOTO France tutorial, the after-sales service manager explains how to prepare a CFMOTO motorcycle or quad for winter storage in a few steps. The procedure is demonstrated on the 700CL-X Heritage and a CFORCE 625 quad.
This video presents an ECU tune combined with a performance exhaust developed for the CFMOTO 675SR (675SS) and the resulting dyno measurements. It reports the power gains obtained with this setup and explains how the tune was developed for the performance exhaust.
This tutorial walks through a full do-it-yourself oil change on the 2022 CFMOTO 650NK, step by step: draining the old oil, replacing the oil filter and refilling with fresh oil. It is aimed at riders who want to handle basic maintenance themselves.
This short tutorial shows how to clear the maintenance/service warning on the dashboard of the CFMOTO 450MT, the step normally carried out after an oil change or scheduled service.
This video presents a set of performance modifications fitted to the CFMOTO 450MT to improve throttle response, airflow and power delivery. It covers a Throttle Punks airbox, a Coober ECU, decat titanium headers and a throttle-cable adjustment, and describes the effect of each change on how the bike behaves.
This tutorial covers the removal of the SAS (PAIR) secondary-air system and the EVAP charcoal-canister system on the 2024 CFMOTO 450MT. It walks through the required disassembly, the removal of each system, and the reassembly, with timestamps for every step.
This tutorial demonstrates how to change the engine oil and filter on the CFMOTO 800MT (also sold as the Ibex 800T) and how to reset the service indicator afterwards. The procedure is shown as a straightforward job requiring only basic tools.
After a hard break-in over the first 600 miles, this video performs the CFMOTO 800NK's first service, centred on an engine oil change. The oil-change segment walks through draining and refilling the engine for the initial maintenance interval.
This tutorial covers an engine oil and oil filter change on the CFMOTO 800MT, followed by resetting the remaining-distance service reminder on the dash. A complete walk-through of the routine maintenance interval.
This video demonstrates an engine oil change on the CFMOTO 700CL-X. The procedure is common to the shared 700CL-X platform and covers draining the old oil and refilling the engine.
This is the second part of a teardown of the CFMOTO 450SR, showing the bike being progressively disassembled. It offers a close look at the bodywork and components for anyone needing to access or service parts under the fairings.
This tutorial demonstrates a quick and simple engine oil and filter change on the CFMOTO 450NK. The same procedure applies across the 450 platform, including the 450SR, 450MT and Ibex 450. It lists the basic tools, oil filter and crush washer needed for the job.
This teardown shows how to remove the front-end panels of the CFMOTO 450MT to access the ECU and accessory power terminals. It also covers replacing a damaged headlight, broken panels and a failed USB charger. Useful preparation for fitting auxiliary lights, heated grips or other electrical accessories.
This video documents a complete teardown of the CFMOTO 1000MT, stripping the machine down to the bare frame and removing the engine. It walks through the fairings and panels, the ABS pump, the braking and suspension hardware, the cooling system, and then the full disassembly of the engine, including camshafts, valves, bearings, pistons and crankshaft.
Removal of the EVAP (evaporative emissions control) system on the CFMOTO 800MT, presented as a fix for inconsistent throttle response. The video walks through diagnosing the symptom, removing the EVAP system and its associated hosing, then a test to assess the effect on throttle response. A simple, low-cost modification shown step by step, using common parts.
This video covers a known issue with the CFMOTO 800MT Explore airbox. The creator identifies design flaws in the factory airbox that can lead to performance loss and engine problems over time. He then walks through a full step-by-step disassembly and fix to improve durability and efficiency
Complete maintenance video on the 2024 CFMOTO IBEX 800, covering the engine oil change and filter replacement, tire pressure adjustment, as well as chain inspection and lubrication. IBEX is equivalent to Touring.
In this video, discover the complete disassembly of the CF MOTO 800MT Touring, presented step by step. Whether you are an amateur or professional mechanic, this visual guide will help you understand the complete structure of this motorcycle and identify each component.
Video of a CF Moto 800 MT disassembled, the steps are not detailed but gives an overview of the components.
Kein Video entspricht diesem Filter.
Ihre Favoriten werden nur auf diesem Gerät gespeichert. Sie können sie entfernen, aber das ist endgültig — alle Ihre gespeicherten Videos gehen verloren.
