CFBikes
From CFMOTO's official manuals

CFMOTO Suspension Calculator

An independent, open-method calculator for 17 CFMOTO models across 5 ranges — MT, NK, CL-X, SR and GT. Enter your real riding load to get suspension settings interpolated from CFMOTO's official factory data.

See exactly how it's calculated →

Configuration

kg only
Weight unit
75 kg
Count directionSelect a model to see the correct count direction. 800/1000 series do not count from the same side.
CalculationSettings are interpolated from the factory baseline weight using the model's load chart.
Type of useThese values are meant for road riding with a normal load, not a "mixed" on/off-road compromise. Factory charts are organised by how much the bike carries (rider, passenger, luggage), not by the type of terrain — which is exactly why the off-road mode offered in the configurator is a calculation: it softens the factory road settings rather than reading a dedicated off-road chart.
Fine tuneBike bouncing or springing back too fast after a bump? Close the rebound a little. Feeling harsh and jarring over small bumps? Open the compression a touch. If the rear sags too much under load, start by winding on a little rear preload.
Real bike checkNever force an adjuster: if your bike doesn't reach the exact value from the chart, just use the closest setting you can. Above all, take the time to test it properly on the road.
Disclaimer. This is an independent project, not affiliated with CFMOTO. Other similar tools may exist; this one aims to be the most transparent about its data and methodology. Settings are computed by our own published method from the manufacturer's official factory data, without inventing any numbers. Always validate with a proper sag check and test rides, and never force an adjuster beyond its physical range.